New Construction

To install windows in a new building or when siding has been completely removed.

NC NFAW Main Image

New Construction Installation After Building Wrap for Nail Fin Windows

A window is installed on a stud wall with sheathing after the building wrap is in place. It is then attached using the nailing fin and integrated with the building wrap using flashing tape.

WindowsEnglishSpanish
Windows with Impact-Resistant GlassEnglishSpanish
NC NFBW Main Image

New Construction Installation Before Building Wrap for Nail Fin Windows

A window is installed on a stud wall with or without sheathing before the building wrap is in place. It is then attached using the nailing fin and integrated with the building wrap using flashing tape.

WindowsEnglishSpanish
Windows with Impact-Resistant GlassEnglishSpanish
NC NFWR Main Image

New Construction Installation with Water Resistant Sheathing for Nail Fin Windows

A window or door is installed on a stud wall with water-resistant sheathing. It is then attached using the nailing fin and sealed to the water-resistant sheathing.

WindowsEnglishSpanish
Windows with Impact-Resistant GlassEnglishSpanish
NC NFMC Main Image

New Construction Installation in Masonry Construction for Nail Fin Windows

A window or door is installed on a concrete or masonry wall with wood buck. It is then attached using the nailing fin and sealed to the wood buck.

WindowsEnglishSpanish
Windows with Impact-Resistant GlassEnglishSpanish
New Construction with Nail Fin Main Image

New Construction Installation with Nail Fin over 1 1/2" - 2" Continuous Exterior Insulation Using Rough Opening Support Brackets. (Patent Pending)

A window is installed on a wall with continuous exterior insulating panels. It is then supported via the support brackets at each shim location, attached using the nail fin installed over the exterior rigid insulation to the water-resistive barrier.

FF NF Main Image

Full Frame Replacement After Brickmould or Trim Removal or Siding Cut-Back for Nail Fin Windows

The existing window or door and wood brickmould or trim is removed. The new window or door with nail fin is sealed and attached to the wall in the opening left by the removal of the existing brckmould and window or door. Exterior trim is then used to cover the nail fin.

WindowsEnglishSpanish
Windows with Impact-Resistant GlassEnglishSpanish
NC BFMC Main Image

Masonry Construction for Block Frame Windows

A window is installed on a concrete or masonry wall. It is then attached using screws through the frame or clips and sealed to the exterior brick, siding or stucco.

WindowsEnglishSpanish
Windows with Impact-Resistant GlassEnglishSpanish
NC FFMC Main Image

New Construction Installation in Masonry Construction for Flush Flange or Wood Brickmould Windows

A window or door is installed in concrete or masonry wall with wood buck. It is then attached using frame screws or clips and sealed to the wood buck using the flush flange or brickmould.

WindowsEnglishSpanish
Windows with Impact-Resistant GlassEnglishSpanish
NC BYBW Main Image

New Construction Installation After Building Wrap for Bay or Bow Windows

A window or door is installed on a stud wall with sheathing after the building wrap is in place. It is then secured to the wall and integrated with the building wrap using flashing tape.

Clad Exterior Angle Jamb Bay/Bow with Head and Seat BoardEnglishSpanish
Clad Exterior Bow Without Head and Seat BoardEnglishSpanish
Clad Exterior Square Jamb Bay/Bow with Head and Seat BoardEnglishSpanish
Pella® Impervia® Bay and BowEnglishSpanish
ThermaStar by Pella and Encompass by Pella Garden WindowEnglishSpanish
ThermaStar by Pella® and Encompass by Pella® Double-Hung and Casement BayEnglishSpanish
ThermaStar by Pella and Encompass by Pella Bow without Head and SeatboardEnglishSpanish